10
5.2 Connections
No external power sources required for this product
5.3 Setting of the operating parameter
No customer adjustment available to this unit
5.4 Cleaning
If operated and cleaned correctly your Boilermag XL will give many years of trouble free filtration with
no consumable parts. The filter will remove even the smallest particle due to its high magnetic filed
strength. Cleaning should take no more than a few minutes.
Turn off the heating system
Isolate the filter from the system flow
Using Screwdriver, open the air vent in the top of the filter
Remove the Drain Plug using Tool provided.
Fully drain contents into a suitable container.
Using the Tool provided, unscrew and remove M8 Domed nuts / Washers
Lift the Magnet Cartridge Assembly out of the body and move it away to a cleaning station.
Non-magnetic contamination will remain in the bottom of the bowl and requires rinsing out
Remove the Quick release Mesh Plate from the Magnet Core Assembly and rinse clean
Using the cleaning tool provided, scrape the bulk of the ferrous contamination off the magnet core
and into a suitable container
–
it is not essential to remove all of the collected contamination
Refit the Mesh Plate to the Magnet Core Assembly
Re-assemble the Magnet Cartridge Assembly into the body
Refit and tighten M8 Domed Nuts / Washer
Refit the Drain Plug
Close vent
Remove the Filter isolation
Carefully open the air vent to release any trapped air
Close Vent
Switch on the heating system
Do not use corrosive substances to clean the equipment
