EcLine EC-OS-7200D, Руководство пользователя

Страница: 21 / 36

Installation
17
2.3 INSTALLING THE SCANNER ON A COUNTER SURFACE
To install the
unit
without the flexible scanner stand, follow the instructions
below.
1.
Remove the two rubber feet from the back cover. Lead the communication
cable and power supply cable through the slit. Fasten the back cover to the
surface with two screws as illustrated in the figure.
NOTE
ƒ
You can use the back cover as a template to mark the places
for the mounting holes at the counter surface and drill two
holes.
ƒ
If you do not want to drill holes in the counter top, the
unit
can
be installed without fixing it to the surface. In this case the
rubber feet will prevent the
unit
from sliding.
2.
Position the
unit
as indicated in the figure below and rotate the
unit
around the cover. Make sure that connectors and cables are placed as
indicated in the figures, to allow easy attachment of the
unit
to the back
cover. Press the
unit
until a "click" is heard.