70
Set
tings
8.10.2
SOURCES SETUP
Adjustment of
the amplifier's
audio sources
.
A Source is the combination of a primary input signal and a secondary
(optional)
input signal.
•
Label:
label of the source.
•
Prim. Input:
selection of the primary input signal.
•
User Range
Volume limits set by the user via user panels.
•
Sec. Mode:
operating mode of the secondary signal
o
Priority:
the secondary signal has priority. The secondary signal will be swapped
with the primary signal when a signal is detected on the secondary signal.
o
Backup:
the primary signal has priority. The secondary signal will be swapped
with the primary signal when no primary signal is detected.
•
Prim./Sec:
If this function is enabled, the priorities defined in this section are set.
•
Now playing
: indicates the signal present at the source (primary or secondary).
•
Priority:
configuration of a source with a secondary priority signal.
