17
USER DEFINED BUTTON
Pressing the
DISPLAY ON/OFF
button allows turning the display on and off via CEC
commands. If the display doesn’t support CEC, the
DISPLAY ON/OFF
button can be
programmed by IR learning feature or RS-232 command.
11.1. IR learning programming
Please follow the IR learning steps below in order to define the
DISPLAY ON/OFF
button
functions:
1.
Press and hold the
DISPLAY ON/OFF
button at least five seconds until the
SOURCE AUTO
button starts to flash in order to enable the IR learning mode.
2.
Press the
DISPLAY ON/OFF
button to choose the ON or OFF IR command to be
set:
➢
Button LED lighting indicates that
DISPLAY ON
mode is selected.
➢
Button LED flashing indicates that
DISPLAY OFF
mode is selected.
3.
Point the IR remote at the IR sensor and press the respective button on the IR
remote.
4.
The
SOURCE AUTO
and
DISPLAY ON/OFF
buttons will keep lit for 3 seconds to
indicate that IR command has been learnt: the
SOURCE AUTO
button will keep
flashing and the
DISPLAY ON/OFF
button will be off.
5.
Press and hold the
DISPLAY ON/OFF
button for five seconds again to exit IR
learning mode. Please note that The IR learning function will self-terminate after
30 seconds of inactivity.
