8
12.
USB-C LED
: The LED illuminates orange when the USB-C port is connected to a
source device, and it will turn green once the device is selected as input source.
13.
DISPLAY ON/OFF
: Press the blue-backlight button to turn on/off the display by
automatically sending CEC and RS-232 command (Programming required). For
more details, please refer to 8.2 Display Control.
14.
SOURCE AUTO
:
o
Press the blue-backlight button to select the next input source.
o
Press and hold the button at least 3 seconds to enable auto switching
mode. For more details, please refer to
6.2. Rear Panel
1.
HDBT OUT (POC)
: RJ45 HDBaseT output port to connect to the HDBT IN port of
the receiver by a CATx cable. It supports 12V-48V PoC to enable the switcher can
be powered from a compatible receiver.
2.
DC IN
: Power port to connect 24V DC power adapter.
3.
DC OUT
: 2-pin terminal block to connect a compatible device which needs to be
powered.
4.
IR IN
: 2-pin terminal block to connect third party control system.
5.
RS-232
: 3-pin terminal block to connect a control device (e.g. PC) to send the RS-
232 command to control this unit, or to control the far-end third party device. For
more details, please refer to chapter
