Ecler VEO-SWM45, Руководство пользователя, Страница: 20 / 40

20
9. HDBT Receiver
1. POWER LED Indicator: This LED illuminates when device is connected to power
supply
2. DC 24V Power Connector
3. HDBaseT Input Port: Connect it through a CAT5e-CAT7 standard cable to the
VEO-SWM45. This link will provide AV and control signal to the receiver and it
allows to power it from remote without need of any external PSU.
4. HDMI Output Port
5. IR Input Port: Connect the included IR Receiver cable. It allows to remotely
control source installed near the switcher from remote.
6. IR Output Port: Connect the included IR Transmitter cable. It allows control, for
example, a display device connected to the receiver.
7. RS-232: Serial control port suitable for bi-directional RS232 pass-through via
the HDBaseT connection .
8. Connection Signal Indicator Lamp
o
Lit: Transmitter and Receiver are in good connection status.
o
Flashing: Connection issues.
o
Off: Transmitter and Receiver are not connected.
9. Data Signal Indicator Lamp
o
Lit: The HDMI signal is HDCP encrypted
o
Flashing : The HDMI signal is not HDCP encrypted.
o
Off : No HDMI signal.