Ecler HUB Series, Руководство пользователя

Страница: 19 / 36

19
By default, the network configuration is in DHCP mode (dynamic IP address assignment).
Connection to a
router/switch with DHCP server is required. To query the IP assigned to
the device, press and hold the CTRL and rotary encoder keys simultaneously for 3
seconds.
Figure 14: front panel LCD display and control keys
Note:
HUB devices use the mDNS service to access them through a web browser on the
same local network (LAN). To do this, enter in the search bar of your browser:
device_name.local. By default,
“hub1616.local” in HUB1616, “hub1408.local” in
HUB1408.
The configuration screen (CONFIG) shows the following information:
• Firmware version running on the unit
• NAME: name of the HUB unit
• Network connection parameters: IP address, subnet mask and network gateway
• Auto/Manual: IP assignment mode. AUTO: is in DHCP mode, the IP address
assignment is automatic. MANUAL: allows the configuration of manual network
parameters. Default:
o
IP: 192.168.0.100
o
MASK: 255.255.0.0
o
GW: 192.168.0.1
• Admin: number of admin users connected to the unit (0 or 1)
• Users: number of client users, via Ecler pilot application or web browsers (0 to 20)