5
1.2
Key Safety Directions
1.
Read the following directions.
2.
Keep the following directions.
3.
Heed all warnings.
4.
Follow all directions.
5.
Do not use this device in proximity to
water.
6.
Clean only with a dry cloth.
7.
Do not block any ventilation
openings. Install in accordance with
the manufacturer’s instructions.
8.
Do not install near any heat sources
such as radiators, heat registers,
stoves, or other devices (including
amplifiers) that may release heat.
9.
Do not defeat the safety purpose of
the polarized or grounding type
plug. A polarized plug has two
blades, being one wider than the
other. A grounding type plug has
two blades and a third grounding
prong. The wide blade or the third
prong are provided for your safety. If
the provided plug does not fit into
your outlet, contact a qualified
electrician for a replacement of the
obsolete outlet.
10.
Protect the power cord from being
walked on or pinched, particularly at
the plugs, convenience receptacles,
and at the point of exit from the
device.
11.
Only use attachments/accessories
specified by the manufacturer.
12.
Unplug the device during lightening
sorts or when unused for long periods of
time.
13.
Refer all servicing to qualified personnel.
Servicing is required when the device
has been damaged in any way, such as
power supply cord or plug damage,
liquid spillage or objects onto the device,
the device has been exposed to rain or
humidity, does not operate normally, or
has been dropped.
14.
Disconnecting from mains: When
switching off the POWER switch, all the
functions and light indicators of the unit
will be stopped, but fully disconnecting
the device from mains is done by
unplugging the power cable from the
mains input socket, therefore, it should
always remain easily accessible
15.
Equipment is connected to a socket-
outlet with an earthing connection by
means of a power cord.
16.
The marking information is located at the
bottom of the unit.
17.
The device shall not be exposed to
dripping or splashing liquids, and no
liquid-filled objects, such as a filled up
glass, shall be placed on top of the
device.
1.3
Cleaning Directions
Clean the unit with a soft, dry clean cloth
or slightly wet with water and neutral liquid
soap only, then dry it with a clean cloth. Be careful that water never gets into the unit through
any hole. Never use alcohol, benzine, solvents or abrasive substances to clean this unit.
NEEC AUDIO BARCELONA, S.L.
accepts no liability for any damage that may be caused to
people, animal, or objects due to failure to comply with the warnings above.
