Ecler eCA120HZDN, Руководство пользователя

Страница: 8 / 16

8
Once turned on, the front volume control ( VOLUME ) and the controller connected to
the REMOTE VOLUME p ort (if any) may be used to set the output volume of the signal
powered by the unit.
To select the audio input signal, use the switch located at the front panel ( INPUT
SELECT ).
Priority function
When the priority function ( PRIO MODE ) is activated, one of t he input signals will
have priority over the other, that is to say, when signal presence is detected in the
priority input (signal level exceeds the threshold) the input signal selected with
INPUT SELECT switch will be attenuated.
For instance, if priority function is activated (PRIO MODE in ON position) and the
selected audio signal is Dante™ (INPUT SELECT in DANTE position), the priority audio
signal will be the analogue input.
The priority mode allows adjusting the attenuated signal recovery time ( PRIO
RELEASE TIME ) , by means of a switch FAST / SLOW located at the rear panel.