Ecler eCA120HZDN, Руководство пользователя

Страница: 7 / 16

7
eCA120HZDN:
The powered output ( OUTPUT ) uses a Euroblock connector with a common terminal
(0V), a terminal for a 70V line and another terminal for a 100V line. Always use the
common terminal and, depending on the type of speaker in the system, one of the two
others, 70 / 100V, to feed the loudspeaker line.
The connection cable that connects the eCA120HZDN connectors and the speakers
should be good quality, with a suitable cross section and as short as possible.
The OUTPUT provides a powered version of the mono-converted input signal.
Remember that the total power used by the speakers connected to the eCA120HZDN
output should not exceed the maximum power it can provide.
In addition, eCA120DN and eCA120HZDN feature an aux audio output ( AUX OUTPUT )
with Euroblock connector. This stereo audio signal is identical to the powered signal,
but with LINE level. Perfect to connect an additional audio system like a self-powered
sub-woofer for bass reinforcement.
Remote control port
The RJ -45 ( REMOTE ) connector allows to connect a WPmVOL-type wall control panel
(or another model of the WPm series) to adjust the overall output volume. The
connection is made with a standard CAT5/CAT6 cable between the WPm wall panel and
the REMOTE connector of the eCA120DN / eCA120HZDN.
OPERATION
AND USAGE
Start up
Start up the eCA120DN / eCA120HZDN by connecting the equipment to an external
power source to which the DC IN 24V connector of the amplifier has already been
connected. The LED indicator ON/STBY immediately lights up on the front panel. We
recommend you turn on all the devices in the following order: sound sources, mixer,
equalisers, active filters and processors and, finally power amplifiers. Powering off
should be done by following the exact reverse sequence. Following this order, the
introduced noise due to turning on or switching off the devices will not affect those
further on in the chain and will be inaudible.