Ecler DP400 Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 24

Ecler DP400 Скачать руководство пользователя страница 19

19

9.1. DP:lab2. DESCRIPTION

DP:lab2

is a graphic interface that makes it easier and more comfortable to manage the DP400

than with the controls on the front panel of the unit.

Connecting the DP400 to the computer

Use the USB cable provided with the DP400 to connect it to your PC or laptop computer. Then,

click on the corresponding icon to start up

DP:lab2

. The

DP:lab2

start screen will appear on the screen.

Press CONNECT (on the upper left side of the screen) to initiate communication between the computer
and the unit.

If the DP400 is not working properly or the USB cable is not connected

correctly, the following message will be displayed in

DP:lab2

:

If this is the case, double-check the USB connection and make sure

the DP400 is working.

After completing these steps, you are ready to modify the input and

output parameters and operating modes (presets), recall and store configurations in the DP400 and PC,
and apply the desired password-protected safety lock, all from your computer.

Disconnecting the DP400 from the computer

After you have finished using

DP:lab2

with the DP400 connected to the computer, you must

deactivate the virtual CONNECT button on the upper left-hand side of the screen. Then, disconnect the
USB cable from the DP400.

The following is a description of the main menus and submenus in

DP:lab2

.

9.2. PROGRAM AND CONFIG MENUS

In the upper left-hand side of the screen,

DP:lab2

has two menus that are used primarily to

manage PC-to/from-DP400 communications, select the operating mode (presets), put a lock on the unit,
and manage the storage and recall of configurations from the DP400 and PC.

CONFIG MENU – RS232 (USB)

DP:lab2

allows you to choose the serial communication port used in the USB connection with the

unit.

«
...
17
18
19
20
21
...
»

Содержание DP400

























Отзывы:

Нет отзывов