Ecler DP400, Руководство пользователя, Страница: 13 / 24

13
8. OUTPUTS
The DP400 has 6 fully configurable outputs or channels for increased versatility.
To select an output, press the ENCODER several times until OP
and the desired output number appear on the screen. Once selected,
browse through the submenus using the PREV/NEXT keys.
Some submenus, like EQUALIZATION (EQ), have several
parameters than can be modified. Use the ◄ and ► keys to select the
parameter and modify them with the ENCODER.
The following diagram shows the menus available for each
output:
You can make the following modifications to each of the outputs:

Gain, phase and source: allows you to adjust the channel gain
(-40 dB to 12 dB), phase (in phase + or out of phase, -) and which
input (IN A, IN B, IN A+IN B and OFF) corresponds with the
current output.

Channel delay: can be adjusted from 0 ms to 21.31 ms. The
LCD screen will automatically show the corresponding values in
metres (m) and feet (ft).

Channel equalization (EQ): the processor allows the following
types of equalization
o
Parametric (Peq)
o
Lo12 – Low 12 dB/oct
o
Lo6 – Low 6 dB/oct
o
Hi12 – High 12 dB/oct
o
Hi6 – High 6 dB/oct
Each type includes the following general parameters:
o
Frequency
o
Gain (can be adjusted from -30 dB to +15 dB)
o
Bandwidth: from 0.01 to 4 (only in Peq)
Each channel can have a maximum of 4 assigned equalization points without affecting the unit’s
processing resources.
All of the equalization points can be bypassed with the EQ ON/EQ OFF option at the start of the
current output’s EQUALIZATION submenu.