Eckman EKPWT1, Инструкция по эксплуатации

Страница: 9 / 18

9
2. Mount blade retainer and grass trimmer head, hand tighten it securely.(see
Fig.8)
WARNING! Do not use the line cutting head without the plastic guard.
Note: Please store the blade retainer and nut in a safe place.
Straps supplied are used to fasten throttle cable to handle , to avoid
interference during operation.
Operating
PREPARATION FOR USE
1. Use fresh unleaded petrol to mix with 2-stroke oil on basis at a ratio of :25:1
petrol to oil. Use a separate container for mixing and shake well.
2. Place the power unit upright on the ground or on a sturdy bench and wipe
any debris from around the fuel cap.
3. Unscrew the fuel tank cap and pour the unleaded petrol / oil mix into the
tank with the aid of a funnel.
4. Be careful not to spill any petrol. If this happens, wipe the spill with a clean
rag.
5. Start the engine at least three meters away from the area where the fuel
tank has been filled up in order to avoid any risk of fire.
DANGER OF FIRE AND BURN INJURIES
1. Always use extreme care when handling fuel! Fuel is highly flammable.
2. Never attempt to put fuel in the engine if the fuel system components are
damaged or are leaking.
3. Never attempt to refuel the engine while it is running or still hot. Allow it to
cool first.
4. Never smoke or light any fires near the engine or fuels.
5. Always transport and store fuels in an approved container.
6. Never place flammable material close to a hot engine exhaust.
7. Do not use petrol which contains ethanol or methanol as it may damage the
Blade
retainer
Fig.8