Eckman EKPWT1, Инструкция по эксплуатации

Страница: 8 / 18

8
Connect the top handle to the lower handle using two knobs supplied.(see
Fig.4)
Fitting Plastic Guard
Unscrew the bolts on the chromed metal guard holder and mount on the plastic
guard, line up the holes then fix and tighten.(see Fig.5 and Fig 6)
Fitting Brush Cutter Blade
Mount the blade on the shaft, then put on the inner flange and blade retainer.
Stop the blade from turning by using the hex-
key. You’ll need to line up the two
holes in the side of the cutting head assembly and insert the hex key in them to
keep the blade still.(see Fig.7)
If you use the unit as a grass trimmer follow the instructions below:
1. Loosen the blade retainer nut clockwise and remove the blade retainer and
inner flange and blade.
knob
Fig.4
Inner
flange
Blade
retainer
Fig.7
Fig 5
Fig 6