LiteWizard™ Installation Manual
Electronic Controls, Inc.
7073 North Atlantic Ave. Cape Canaveral, FL 32920
800-633-9788
P a g e
|
7
7.4
LiteWizard™ Configuration
7.4.1
Option Switches
There are 6 configuration switches on the LiteWizard board. See Figure 1- LiteWizard Circuit Board.
Each switch pertains to one of the inputs. If the input is used the associated switch number must be in the
ON position.
Configuration switches must be set before applying power to unit.
NOTE: Switch 6 must be ON for all configurations whether it is used or not.
Figure 1- LiteWizard Circuit Board
7.4.2
Input Voltage
Each input has an associated jumper for the input voltage level ranging from 6 to 110 volts AC or DC.
Warning: Be sure to set the jumper to the appropriate voltage level or permanent
damage to board may result.
TEST BUTTON
OPTION SWITCHES
AC POWER INPUT
