ECI AS9216 Скачать руководство пользователя страница 76

Страница: 76 / 86

Setup and Maintenance

AS9216 Installation and

Maintenance Manual

9-4

ECI Telecom Ltd. Proprietary

492006-2306-013-A00

NETCONF Capabilities

NETCONF capabilities are a set of functionalities that supplement the base

NETCONF specification.

NETCONF allows the client to discover the

capabilities

supported by the

server. These capabilities are sent to the management PC.

Table

9–1: NETCONF Standard Capabilities

Command

Description

:candidate

The agent allows this special database to be locked,

edited, saved, and unlocked. The agent also

supports the operations:



<discard-changes>: clears all changes from the

<candidate/> configuration database and makes

it matching the <running/> configuration

database



<commit>: commits the contents of the

<candidate/> configuration database to the

<running/> configuration database

:confirmed-commit

This special mode requires an agent to send two

<commit> RPC requests instead of one, to save any

changes to the <running/> database. If the second

request does not arrive within a specified time

interval, the agent automatically reverts the running

configuration to the previous version.

:interleave

The agent accepts <rpc> requests (besides <close-

session>) while notification delivery is active. The

:notification

capability must also be present

if this capability is advertised.

:notification

The agent supports the basic notification delivery

mechanisms defined in RFC 5277. The <create-

subscription> operation (creates a NETCONF

notification subscription) is accepted by the agent.

Unless the

:interleave

capability is also

supported, only the <close-session> operation

(terminates this session) must be supported by the

agent while notification delivery is active.

:rollback-on-error

The agent supports the

rollback-on-error

value for

the <error-option> parameter to the <edit-config>

operation (modifies a configuration database). If

any error occurs during the requested edit

operation, the target database (usually the running

configuration) will be left affected. This provides

all-or-nothing

edit mode for a single <edit-

config> request.

Содержание AS9216























































































Результаты поиска

Содержание AS9216

Отзывы:

Похожие инструкции для AS9216

Бренды по названию

Популярные бренды

ECI AS9216, Руководство по установке и обслуживанию

Результаты поиска

Содержание AS9216

Отзывы:

Похожие инструкции для AS9216

Бренды по названию

Популярные бренды