ECI AS9216 Скачать руководство пользователя страница 20

Страница: 20 / 86

AS9216 Description

AS9216 Installation and

Maintenance Manual

2-2

ECI Telecom Ltd. Proprietary

492006-2306-013-A00

AS9216 ports, power supply units, and fans are placed on the device’s front

panel, to ensure an easy maintenance access to these components.

The Panel Ports

16 SFP Sockets (#1/1/1–1/1/16) dual rate support 100Base-Fx/1000Base-X

(SFP)

The device provides 16 ports for dual rate support of Fast Ethernet or Gigabit

Ethernet SFP compliant fiber-optic transceivers. You can use each fiber port

for a direct connection to a subscriber’s Customer Premises Equipment (CPE)

or as a downlink to another aggregation node.

Each port supports auto-negotiation of flow control, automatically preventing

port buffers from becoming saturated.

You can restrict each port’s bandwidth by rate-limiting, in order to support

differentiated service fees.

OTE

: The SFP sockets comply with Multi-Source

Agreement (MSA) standard, however ECI Telecom

guarantees the proper functionality of SFP transceivers that

were tested and approved by ECI Telecom only.

To verify the use of a specific SFP transceiver, contact ECI

Telecom Technical Support.

8 Dual Ports (#1/2/1–1/2/8) rate support 10/100/1000Base-T or 100Base-

Fx/1000Base-X (RJ45 ports/SFP Sockets)
4 10-GbE MPLS enhanced sockets (#1/3/1–1/3/2, 1/4/1–1/4/2, XFP)

The device provides four ports for 10 Gigabit Ethernet XFP compliant fiber-

optic transceivers. These fiber ports are designed to serve as an uplink

connection to the central office or a downlink to another aggregation node.
The transceivers support the following cable lengths:



10GBASE-SR transceivers support short-haul connections of up to 300

meters



10GBASE-LR transceivers support a connection of 10 kilometers



10GBASE-ER transceivers support a connection of 40 kilometers

Outband Ethernet Port (ETH)

An RJ45 outband port allowing management and software upgrades of the

device.

Содержание AS9216























































































Результаты поиска

Содержание AS9216

Отзывы:

Похожие инструкции для AS9216

Бренды по названию

Популярные бренды

ECI AS9216, Руководство по установке и обслуживанию

Результаты поиска

Содержание AS9216

Отзывы:

Похожие инструкции для AS9216

Бренды по названию

Популярные бренды