Chapter 4
•
Cabling, connections, and grounding
1039740-0001 Revision B
41
Routing the IFL cable at the antenna
1.
Insert one end of the IFL cable into the feed support arm and thread it
through the feed support arm until it comes out the opposite end, as shown in
Figure 23: IFL cable configuration
2.
Leave an adequate coiled service loop (6 ft to 10 ft) and use UV-resistant cable
ties to secure it to the mast, boom arm bracket, or Az/El mount, providing a
minimum cable length of 25 ft between the radio and the satellite modem.
Note:
—
Do not leave the service loop lying on roof or other mounting surface.
—
Do not block access to the azimuth and elevation adjustment nuts on
the Az/El mount assembly.
—
Be sure to run a grounding wire from the Az/El plate to the ground
block.
3.
Coil any additional cable and secure with UV-resistant cable ties, which are
black in color.
Where the IFL cable connects to the radio or to a ground block, tighten the
cable connector to 20 inch-lb.
Overtightening the radio connector can result
in damage to the radio assembly.
Содержание HUGHES JUPITER AN9-098-G
Страница 10: ......
Страница 12: ...12 Chapter 1 Overview 1039740 0001 Revision B Figure 1 Hughes model AN9 098 G 0 98 m satellite antenna ...
Страница 44: ......