Chapter 3
•
Installing the antenna and radio
1039740-0001 Revision B
27
Installing the reflector bracket and tilt plate
Attach the tilt plate and reflector bracket to the Az/El mount as shown in
on page 27.
1.
Place the reflector bracket against the face of the Az/El mount. Make sure
that the Az/El mount fits inside the lip of the reflector support. Then place the
polarization plate over the round opening in the reflector bracket.
2.
Rotate the polarization plate so that the five holes line up with the
corresponding holes in the Az/El mount.
Note:
The polarization plate contains additional holes that will not line up
with holes in the Az/El mount.
Figure 9: Attaching the reflector bracket and polarization plate
3.
Insert five carriage bolts through the polarization plate and into the
corresponding holes in the Az/El mount.
Содержание HUGHES JUPITER AN9-098-G
Страница 10: ......
Страница 12: ...12 Chapter 1 Overview 1039740 0001 Revision B Figure 1 Hughes model AN9 098 G 0 98 m satellite antenna ...
Страница 44: ......