Fig. 6: Power button.
Fig. 4: Purple LED – Booster is synching.
Fig. 5: Blue LED – Synchronization is complete.
< FLASHING >
< FLASHING >
< SOLID >
< SOLID >
2. Watch the LED on the Booster as the
device automatically syncs with your
Hughes modem.
The LED will flash
purple for a few minutes while this
happens.
See Figure 4.
A. When the LED is solid blue, the sync
is complete. See Figure 5.
B. Disconnect the LAN cable from your
Hughes modem and the Booster.
The Booster will flash red before
returning to solid blue. See Figure 6.
C. Press the Power button on the back
of the Booster to power it down ,
as shown in Figure 6. Unplug the
device’s power supply from the
outlet, leaving the power cable
connected to the Booster.
STEP 2: Synchronize
Expected LED sequence for Step 2.
