Fig. 1: Power button.
Fig. 2: Red LED. Booster is ready for configuration.
Fig. 3: Connect the Booster to the HT2000W.
< FLASHING >
< SOLID >
For the initial setup, you must be near your
Hughes HT2000W Wi-Fi Modem.
1. To configure the Hughes Wi-Fi Booster:
A. Plug the AC adapter into the Booster
and the other end into a power
outlet. Push the power button on the
back of the device to power it on, as
shown in Figure 1.
B. Lay the Booster horizontally, as
shown in Figure 2, so you can
clearly see the LED on the bottom of
it.
Wait for the LED to turn red. This
may take a few minutes. The LED
will turn colors before red.
C. Connect the yellow LAN cable to the
back of the Booster and the other
end to the back of your Hughes
modem. See Figure 3.
STEP 1: Connect and Configure
Expected LED sequence for Step 1.
