EchoStar DTVPal, Руководство пользователя

Страница: 15 / 63

Getting Started
7
Watching TV
- If your TV is connected to your DTVPal DVR using the coaxial
connection (step 7), set the TV to channel 3, which is the default
output channel for the DTVPal DVR.
Note:
If you have a local channel that broadcasts on channel 3, you
can change the modulator output setting for your DTVPal DVR to
channel 4 during this Setup Wizard, described below.
- If your TV is connected to your DTVPal DVR using any other type of
connection (steps 4-6), you will need to set the TV to the correct
video input or source. Most TV remote controls have an INPUT,
SOURCE, or TV/VIDEO button that you can use to change the TV’s
video input or source. Refer to your TV’s user guide for additional
help changing the TV’s input or source for the DTVPal DVR.
2. Ensure that your over-the-air antenna is connected to your DTVPal
DVR and the antenna is positioned where it can receive local digital
broadcasts. If you need help choosing or installing an over-the-air
antenna, refer to www.antennaweb.org or your local retailer.
3. Install the included AAA batteries in the DTVPal DVR remote control.
Be sure to follow the battery installation diagram printed inside the
remote control’s battery compartment.
4. The first time your DTVPal DVR turns on, a Setup Wizard screen
appears and guides you through the system setup process. The wizard
scans for local digital over-the-air channels, and helps you set up the
settings for your local area and TV display.
5. To navigate through the Setup Wizard, use the SELECT button on your
remote control to confirm the highlighted (orange) onscreen option. To
highlight other options, use the ARROW buttons.
Tip:
If there is a particular digital channel you would like to use to opti-
mize the position of your antenna, you may select it by clicking Point
Antenna instead of Continue on the first screen of the Setup Wizard.
6. Select Continue to begin the wizard. The Setup Wizard immediately
begins trying to find channels and add them to your system. (If you
have previously run the wizard, then any currently stored channels will
be removed.)