Installation Guide
8
DVR-50 (G)
5 Channel DVR Recorder
When choosing a mounting location, please ensure that there is sufficient access to the front cover of the
DVR-50 to allow it to open.
Also ensure that there are no electrical or fluid lines behind any panels that are to be drilled that could
become punctured.
Once the mounting location has been decided, secure the unit with 4 screws.
Connect the main power harness to +12V, IGN and Ground.
Make all camera connections before powering up the unit.
Connect and route the GPS antenna (DVR-50-G only) to a position where it has a clear and unobstructed
view of the sky. Any metalwork or large wiring looms above the antenna can obstruct its operation.
A/V OUT
IPC
+12V
(RED)
(YELLOW)
IGN
(BLACK)
GND
IPC Camera
Camera CH4
A/V Out to Monitor
DVR-50-TH
(optional)
Camera CH1
GPS Antenna
(DVR-50-G only)
Camera CH3
Camera CH2
A/V IN 4
A/V IN 1
A/V IN 2
A/V IN 3
POWER
Sensor & Serial
GPS
Installation
