EchoLife ET655 IP Phone User Manual
4 Configuring the ET655
15
Menu
Configuration Description
Config
Display the configuration submenus.
[SIP]
Set the SIP server for each account, including
account
,
SIP
proxy
,
Outbound proxy
,
SIP user ID
,
SIP Auth ID
,
SIP
password
,
SIP transport
, and
Audio CODECs
.
[Upgrade]
Configure the firmware server and the file download server.
Select either TFTP or HTTP to upgrade the firmware or
configure the phone.
[Factory Reset]
Type the MAC address on back of the phone. Press OK
softkey to restore the factory reset settings. Factory reset
clears all configurations and restores the phone to factory
settings.
[Layer 2 QoS]
Configure the 802.1Q/VLAN tag and 802.1P priority.
Press
LEFT
or select
Back
to return to the main menu.
Factory
Functions
These items are used for factory testing and not recommended for
users.
[Audio Loopback]
Speak to the handset. If you hear your voice in the handset,
your audio works well. Press
MENU
to exit the mode.
[Diagnostic Mode]
All LEDs are on. Press any key on the keypad to display the
key name on the LCD. Pick up the handset or press
MENU
to
exit the diagnostic mode.
Press
LEFT
or select
Back
to return to the main menu.
Network
Enable or disable the DHCP protocol. Set the IP address, subnet
mask, and gateway address by using the keypad if the static IP
mode is selected.
Reboot
Reboot the device.
Exit
Exit the menu.
