Page 3
ELEDR(H) Installation Guide
Overview
This guide covers Echoflex Solutions Power Load Controller, model numbers
ELEDR-AU 120-277 and ELEDRH-AU 240-347. Both models are equipped with
a 902 MHz radio. The box contents includes the controller and installation
guide. A programming guide with detailed features of the controller is
available for download on
.
The ELEDR is designed to provide control of 120-277 VAC loads. The ELEDRH
is designed to provide control of 240-347 VAC loads. The motor load rating
for the power load controller is 1.5 HP @ 120VAC and 3.0 HP @ 277VAC.
Simple Tap™ technology is included allowing installers and facility operators
to manage configuration settings without any specialized tools.
*see wiring diagram on page 5 for detailed output load ratings
Preparing To Install The Controller
The controller should be mounted in locations and at heights where it will
not be subjected to tampering by unauthorized personnel. The controller is
mounted using the conduit nipple for mounting the controller to electrical
junction boxes or panels. You will require hand tools and supplies (not
provided) to install the controller.
• Screwdrivers, pliers, wire cutters, wire insulation stripping tool
•
Appropriately sized wire nuts
• Small cable ties
Scan the QR code to link to the programming guide
