Echoflex Installation Guide
Vacancy Sensor
Settings
The Elaho Responsive
Vacancy Sensor participates
in an Elaho control system
using the configured Space
and Address, which are
selectable using the rotary
switches on the sensor
electronics.
DIP switches, also located on
the sensor electronics, set
the sensor functionality.
Note:
When the sensor is placed into Custom configuration mode,
DIP switch 2 set to On, all other DIP switch settings are ignored.
Note:
The [MODE] and Auxiliary [A] buttons, and their related LEDs,
are not used and have no functionality on the Responsive Vacancy
Sensor.
Set Space and Address
Two rotary switches on the sensor electronics provide for Space and Address
assignment for the sensor. By default, these switches are set to Space 1,
Address 1. Commands are shared by all devices within a given space.
1. Set the Space rotary switch to the desired number (1 through 16) for
the space you want the sensor to control.
2. Set the Address rotary switch to desired address (1 through 16) for the
sensor identification in the selected space.
Note:
Do not duplicate a device Address within the same Space.
Vacancy Sensor
Page 7 of 12
Echoflex
