Echo X7522340000 Скачать руководство пользователя

Страница: 8 / 56

ENGLISH

PHYSICAL CONDITION

WARNING

Operating this unit while you are impaired can result

in serious personal injury or death to yourself and

others. Never operate the unit if you are fatigued, or

are under the influence of alcohol, medication, or any

other substances that can affect your judgment, reflexes,

vision, or coordination. You must be mentally alert and

physically able to operate a trimmer, brushcutter, edger,

or PAS attachment safely. If you are impaired in any way,

or are physically unable to safely operate and control the

unit, do not fuel, start, or attempt to use the unit.

PERSONAL PROTECTIVE EQUIPMENT

WARNING

Operating a trimmer, brushcutter, or other powered cutting or

work attachment may expose you to sharp blades, powerful

cutting action, spinning nylon cutting line, flying debris, and

other work area hazards. These hazards can cause serious

injury to you and others if you do not take the precautions

necessary for safe operation.

To help protect against risk of injury caused by these

hazards, you must wear appropriate personal protective

equipment:

Eye and Face Protection

Wear eye protection that meets

current ANSI Z87.1 requirements.

For additional safety, a full-face

shield may be worn over safety

glasses or goggles to provide

protection from sharp branches or

flying debris.

OPERATOR SAFETY

Содержание X7522340000

























































Результаты поиска

Содержание X7522340000

Отзывы:

Похожие инструкции для X7522340000

Бренды по названию

Популярные бренды

Echo X7522340000, Руководство по безопасности

Результаты поиска

Содержание X7522340000

Отзывы:

Похожие инструкции для X7522340000

Бренды по названию

Популярные бренды