8
Noise Control
•
Follow local noise regulations on sound levels and hours of
operations. Use only during appropriate hours.
•
Never use a higher speed setting then necessary to perform a task.
The higher the engine speed the louder the blower noise.
•
Be a good neighbor.
Avoid Hot Surfaces
•
During operation, the exhaust area may become very hot, too hot to
touch. Avoid contact during and immediately after operation.
EXTENDED
OPERATION
/
EXTREME
CONDITIONS
Vibration and Cold --
It is believed that a condition called Raynaud’s Phenomenon, which
affects the fingers of certain individuals may be brought about by
exposure to vibration and cold. Exposure to vibration and cold may
cause tingling and burning sensations followed by loss of color and
numbness in the fingers. The following precautions are strongly
recommended because the minimum exposure which might trigger the
ailment is unknown.
•
Keep your body warm, especially the head, neck, feet, ankles, hands
and wrists.
•
Maintain good blood circulation by performing vigorous arm
exercises during frequent work breaks and also by not smoking.
•
Limit the hours of operation. Try to fill each day with jobs where
operating the blower or other hand-held power equipment is not
required.
•
If you experience discomfort, redness and swelling of the fingers
followed by whitening and loss of feeling, consult your physician
before further exposing yourself to cold and vibration.
Repetitive Stress Injuries --
It is believed that overusing the muscles and tendons of the fingers,
hands, arms and shoulders may cause soreness, swelling, numbness,
weakness and extreme pain in those areas. Certain repetitive hand
activities may put you at a high risk for developing a Repetitive Stress
Injury (RSI). An extreme RSI condition is Carpal Tunnel Syndrome
(CTS), which could occur when your wrist swells and squeezes a vital
nerve that runs through the area. Some believe that prolonged exposure
to vibration may contribute to CTS. CTS can cause severe pain for
months or even years. To reduce the risk of RSI/CTS, do the following:
•
Avoid using your wrist in a bent, extended or twisted position.
Instead try to maintain a straight wrist position. Also, when
grasping, use your whole hand, not just the thumb and index finger.
•
Take periodic breaks to minimize repetition and rest your hands.
•
Reduce the speed & force in which you do the repetitive movement.
•
Do exercises to strengthen the hand and arm muscles.
•
Immediately stop using all power equipment and consult a doctor if
you feel tingling, numbness or pain in the fingers, hands, wrists or
arms. The sooner RSI/CTS is diagnosed, the more likely permanent
nerve and muscle damage can be prevented.
Содержание Type 1E PB-2100
Страница 4: ......