34
A
LUBRICATION
Level
1.
Tools Required:
8 mm Open End Wrench, Screwdriver, Clean Rag.
Parts Required:
Lithium Base Grease.
Gear Housing
1.
Clean all loose debris from gear box.
2.
Remove plug (A) and check level of grease.
3.
Add grease if necessary, DO NOT over fill.
Drive Shaft
SRM-3100, 3110 Type 2/2E Only
1.
Loosen two (2) screws (B) and remove center locating screw (C).
Pull gear box and shield from drive shaft.
2.
Pull flexible cable from the drive shaft housing, wipe clean and
recoat with a thin coating of [1/2 oz. (15 ml)] of high temperature
automotive grease.
3.
Slide the flexible cable back in the drive housing. DO NOT get
dirt on the flex shaft.
4.
Install the gear housing and shield assembly.
NYLON
LINE
REPLACEMENT
(SRM-3100, 3110 Type 2/2E)
Level 1
Tools Required:
Head locking tool (if head is to be removed)
Parts Required:
ECHO 0.095" Nylon Trimmer Line 12m (40 feet) long.
1.
Hold drum (A) and turn spool (B) CW (clockwise) until it stops.
Pull spool from drum. DO NOT push in on spool when turning.
C
B
