manualshive.com logo in svg

Echo SRM-22GES, Руководство оператора

Поделиться
Скачать
Echo SRM-22GES Скачать руководство пользователя страница 12

12

SRM-22GES

ASSEMBLING

FRONT (LOOP) HANDLE INSTALLATION

• Position handle in comfortable operating position and

tighten screws (M5

×

35).

Front (loop) handle

Screw M5

×

35

   WARNING

CUT OFF KNIFE ON DEBRIS SHIELD HAS SHARP
EDGES. AVOID CONTACT WHEN INSTALLING OR
REMOVING LINE HEAD.

PLASTIC SHIELD INSTALLATION
(For Nylon Line Operation)

NOTE

The plastic shield is for use with the Nylon Line Head
only. Install Metal Shield when using plastic or metal
blades.

1. Remove plastic sleeve from output shaft.

2. Install the shield on the bottom of the bearing housing

flange.

3. Place shield plate on shield, align holes and install three

screws (M5

×

16).

NYLON LINE HEAD INSTALLATION
(Use with Plastic Shield)

1. Be sure upper adapter plate remains on output shaft.

2. Align locking hole in upper plate with notch in edge of

gear housing and insert head locking tool.

3. Thread line head onto shaft by turning it anticlockwise

until head is tight against upper plate.

4. Remove head locking tool.

Screw M5

×

16

Shield plate

Cut off knife

Shield

Plastic sleeve

Locking tool

Nylon line head

Output shaft

Upper plate

   CAUTION

Fasten output shaft using locking tool securely in
order to avoid the possibility of output shaft
rotating when mounting nylon line head.

Содержание SRM-22GES

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды