![background image](http://html1.mh-extra.com/html/echo/shred-n-vac-es-252/shred-n-vac-es-252_operators-manual_4139847026.webp)
26
X7501185001
© 01/2019 ECHO Inc.
MAINTENANCE
ES-252
Carbon deposits in muffler will cause a drop in engine output and overheating. Spark arrestor screen must
be checked periodically.
1. Remove spark plug lead from spark plug, and remove
engine cover.
2. Remove spark arrestor cover (A), deflector (B), plate (C),
gasket (D), and spark arrestor screen (E) from muffler.
Replace screen if plugged with carbon deposits.
Note: When cleaning carbon deposits, be careful not to damage
the catalytic element inside muffler.
3. Clean carbon deposits from muffler components.
4. Install spark arrestor screen, gasket, plate, deflector, and
cover.
5. Loosely reassemble engine cover.
6. Tighten all screws securely.
7. Attach spark plug lead.
Exhaust Port Cleaning
Level 2.
1. Remove spark plug lead from spark plug, and remove
engine cover.
2. Place piston at top dead center. Remove muffler (A) and
heat shield (B).
3. Use a wood or plastic scraping tool to clean deposits from
cylinder exhaust port.
Never use a metal tool to scrape carbon from the exhaust port. Do not scratch the cylinder or piston when
cleaning the exhaust port. Do not allow carbon particles to enter the cylinder.
4. Inspect heat shield, and replace if damaged.
5. Install heat shield and muffler.
6. Tighten muffler mounting bolts (or nuts) to 60-70 in•lbf
(70-80 kgf•cm).
7. Loosely reassemble engine cover.
8. Tighten all screws securely.
9. Attach spark plug lead.
10. Start engine, and warm to operating temperature.
11. Stop engine, and re-tighten mounting bolts (or nuts) to
specifications.
Parts Required:
As needed: Heat Shield
A
B
C
D
E
A
B
Содержание SHRED 'N' VAC ES-252
Страница 32: ...32 P39726001001 P39726999999...