background image

ES-252

SAFETY

X7501185002

7

© 01/2019 ECHO Inc.

Physical Condition

Your judgment and physical dexterity may not be good:

• If you are tired or sick.

• If you are taking medication.

• If you have taken alcohol or drugs.

Operate unit only if you are physically and mentally well.

Eye Protection

Eye protection that meets ANSI Z87.1 or CE requirements must be worn whenever you operate 
the unit.

For additional safety, a full-face shield may be worn over safety glasses or goggles to provide 
protection from sharp branches or flying debris.

Hand Protection

Wear sturdy, no-slip, rubber work gloves to improve your grip on the handles. Gloves also provide protection 
against cuts and scratches, cold environments, and reduce the transmission of machine vibration to your 
hands.

Hearing/Ear Protection

ECHO recommends wearing hearing protection whenever unit is used.

Breathing Protection

Operators who are sensitive to dust or other common airborne allergens may need to wear a dust mask to 
prevent inhaling these materials while operating unit. Dust masks can provide protection against dust, plant 
debris, and other plant matter such as pollen. Make sure the mask does not impair your vision, and replace 
the mask as needed to prevent air restrictions.

Proper Clothing

Wear snug-fitting, durable clothing:

• Pants should have long legs, shirts should have long sleeves.

• DO NOT WEAR SHORTS.

• DO NOT WEAR TIES, SCARVES, JEWELRY, or clothing with loose or hanging items that could become 

entangled in moving parts or surrounding growth.

• Keep clothing buttoned or zipped, and keep shirt tails tucked in.

Wear sturdy work shoes with nonskid rubber soles:

• DO NOT WEAR OPEN TOED SHOES.

• DO NOT OPERATE UNIT BAREFOOTED.

Keep long hair away from engine and air intake. Retain hair with cap or net.

Heavy protective clothing can increase operator fatigue, which may lead to heat stroke. Schedule heavy 
work for early morning or late afternoon hours when temperatures are cooler.

Содержание SHRED 'N' VAC ES-252

































Отзывы: