manualshive.com logo in svg
background image

• Never spray flammable liquids.

• Never use the power washer in areas that contain 

combustible dust, liquids or vapors.

• Avoid contact of the pressure hose with sharp 

objects and examine the hose regularly. Replace 

if damaged. Due to the high pressure involved, it 

cannot be repaired if cut of damaged.

• Only use detergent specifically formulated for 

power washers and follow instructions on the 

detergent’s label. Power washer detergents are 

also available at your local hardware store.

• Protect eyes, lungs, and skin from exposure to 

detergent. Dish or laundry soap is too thick and 

will clog the nozzle of your detergent tank.

• IMPORTANT: Store the power washer indoors to 

prevent the water in the unit from expanding 

under freezing conditions. When the water 

freezes and expands, your power washer will be 

damaged and become inoperable. Or, if storing 

outdoors, it is recommended you use Pump Saver.

• Never use hot water with your power washer. 

It will overheat and damage the high pressure 

pump.

• Never leave the power washer unattended while 

it is powered “on”.

• Always turn the water supply “on ” before turning 

the power washer power to “on”. Running the 

pump dry will cause damage to the internal 

components.

• Never use a water supply to your power washer 

that exceeds 150 psi maximum.

• Never disconnect the high pressure hose 

from the power washer while the system is 

pressurized.

• Never permanently engage the trigger 

mechanisms on the spray gun.

• Never operate the power washer unless 

all components are properly and securely 

connected.

• Never allow the power washer pump to run for 

more than one minute, after you have turned off 

the water supply. This can cause the motor and 

pump to overheat and fail.

• Never use lances or other parts that have not 

been supplied with your power washer.

• Never use an extension power cord since 

it defeats the effectiveness of the GFCI and 

increases the chance of electrocuting the 

operator.

• Never spray any electrical outlet with your power 

washer.

• Inspect the power cord before using. Do not use 

it if it is damaged.

6

Gfci

Ground Fault Circuit Interrupter Protection:

This pressure washer is provided with a ground-fault circuit-interrupter (GFCI) built into the plugs of the 

power-supply cord. This device provides additional protection from the risk of electric shock. Should 

replacement of the plug or cord become necessary, use only identical replacement parts that include GFCI 

protection.

In a double-insulated product, two systems of insulation are provided instead of grounding. Grounding 

means are not provided for a double insulated product, nor should grounding means be added to the 

product. Servicing a double-insulated product requires extreme care and knowledge of the system, and 

should only be done by qualified service personnel.

Replacement parts for a double-insulated product must be identical to the original parts.

A double-insulated product is marked with the words “Double Insulated”. Product may also be marked with 

a symbol.

Содержание PWE-1800





















Отзывы: