Echo Pro Attachment DPAS-2100 Series Скачать руководство пользователя страница 4

Страница: 4 / 36

DPAS-2100

99922205734

SERVICING INFORMATION

Service of this product during the warranty period must be performed by an

Authorized ECHO Service Dealer. For the name and address of the Authorized

ECHO Service Dealer nearest you, ask your retailer or call: 1-800-432-ECHO

(3246). Dealer information is also available on our Web Site www.echo-usa.

com. When presenting your unit for Warranty service/repairs, proof of purchase

is required.

If you require assistance or have questions concerning the application,

operation, or maintenance of this product, call the ECHO Consumer Product

Support Department at 1-800-432-ECHO (3246) from 8:00 am to 5:00 pm

(Central Standard Time) Monday through Friday. Before calling, please know

the model and serial number of your unit.

the product registration sheet included in this manual. Registering your product

necessary to contact you.

Authorized ECHO Service Dealer, or by contacting ECHO Incorporated, 400

Oakwood Road, Lake Zurich, IL 60047, 1-800-432-ECHO (3246).

The ECHO product you purchased has been factory pre-assembled for

your convenience. Due to packaging restrictions, some assembly may be

necessary.

After opening the carton, check for damage. Immediately notify your retailer or

ECHO Dealer of damaged or missing parts. Use the contents list to check for

missing parts.

1 Power Head With Upper Drive Shaft Assembly
1 Lower Drive Shaft Trimmer Attachment
1 Support Handle Assembly
1 Operator's Manual

Service

ECHO Consumer Product Support

Product Registration

Additional Literature

PACKING LIST

Содержание Pro Attachment DPAS-2100 Series





































Результаты поиска

Содержание Pro Attachment DPAS-2100 Series

Отзывы:

Похожие инструкции для Pro Attachment DPAS-2100 Series

Бренды по названию

Популярные бренды

Echo Pro Attachment DPAS-2100 Series, Руководство оператора

Результаты поиска

Содержание Pro Attachment DPAS-2100 Series

Отзывы:

Похожие инструкции для Pro Attachment DPAS-2100 Series

Бренды по названию

Популярные бренды