![background image](http://html.mh-extra.com/html/echo/power-pruner-ppt-280/power-pruner-ppt-280_operators-manual_532499008.webp)
8
An Emission Control Label
is located on the engine. (This is an EXAMPLE ONLY, information on label varies by
engine FAMILY).
P/N X505002310
Hot Decal (near muffler)
d
escrIptIon
Locate this safety decal on your unit. Make sure the decals are legible and that you understand and follow the instruc-
tions on them. If a decal cannot be read, a new one can be ordered from your ECHO dealer. See PARTS ORDERING
instructions for specific information.
14
13
15
16
17
18
20
19
21
PRODUCT EMISSION DURABILITY (E
MISSION
C
OMPLIANCE
P
ERIOD
)
The 300 hour emission compliance period is the time span selected by the manufacturer certifying the engine emis-
sions output meets applicable emissions regulations, provided that approved maintenance procedures are followed as
listed in the Maintenance Section of this manual.
e
mIssIon
c
ontrol
(
eXhaust
&
evaporatIve
)
EPA 2010 and Later and/or C.A.R.B. TIER III
The emission control system for the engine is EM/TWC (Engine Modification and 3-way Catalyst) and for the fuel tank
the Control System is EVAP (Evaporative Emissions) or N (for nylon tank). Evaporative emission may be applicable to
California models only.