Echo Power Pruner PPT-280 Скачать руководство пользователя страница 16

Страница: 16 / 40

NOTICE:

Use of unmixed, improperly mixed, or fuel older than 90 days, (stale fuel), may cause hard starting, poor

performance, or severe engine damage and void the product warranty. Read and follow instructions in the Storage

section of this manual.

WARNING

Alternative fuels, such as E-15 (15% ethanol), E-85 (85% ethanol) or any fuels not meeting ECHO requirements are

NOT

approved for use in ECHO 2-stroke gasoline engines. Use of alternative fuels may cause performance prob-

lems, loss of power, overheating, fuel vapor lock, and unintended machine operation, including, but not limited to,

improper clutch engagement. Alternative fuels may also cause premature deterioration of fuel lines, gaskets, carbure-

tors and other engine components.

Fuel Requirements

Gasoline -

Use 89 Octane [R+M/2] (mid grade or higher) gasoline known to be good quality. Gasoline may contain up to

10% Ethanol (grain alcohol) or 15% MTBE (methyl tertiary-butyl ether). Gasoline containing methanol (wood alcohol)

NOT

approved.

Two stroke Oil -

A two-stroke engine oil meeting ISO-L-EGD (ISO/CD 13738) and J.A.S.O.

FC/FD Standards must be

used. Echo brand premium Power Blend X

Universal 2-Stroke Oil meets these standards. Engine problems due to in-

adequate lubrication caused by failure to use an (ISO/CD 13738) and J.A.S.O.

FC/FD

certified oil, such as Echo premium

Power Blend X

, will void the two-stroke engine warranty.

IMPORTANT

Echo premium Power Blend X

Universal 2-Stroke Oil may be mixed at 50:1 ratio for application in all Echo en-

gines sold in the past regardless of ratio specified in those manuals.

peratIon

WARNING

Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing, and loose objects away from

all openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete

stop before removing obstructions, clearing debris, or servicing unit.

fuel

WARNING

Operation of this equipment may create sparks that can start fires around dry vegetation. This unit is equipped with

a spark arrestor and a spark arrestor may be required. The operator should contact local fire agencies for laws or

regulations relating to fire prevention requirements.

Содержание Power Pruner PPT-280









































Результаты поиска

Содержание Power Pruner PPT-280

Отзывы:

Похожие инструкции для Power Pruner PPT-280

Бренды по названию

Популярные бренды

Echo Power Pruner PPT-280, Руководство оператора

Результаты поиска

Содержание Power Pruner PPT-280

Отзывы:

Похожие инструкции для Power Pruner PPT-280

Бренды по названию

Популярные бренды