10
NOTE
A light lubricant may be used to ease assembly of flexible pipe to
blower elbow.
6. Clip throttle cable into guide loop (H).
7. Move handle (F) to desired position. Tighten knob (I) hand tight.
Install and tighten clamp screw (E).
8. Assemble straight pipe (J) onto swivel pipe (C), until you feel light
resistance. Do not force connection. Hold swivel pipe and turn
straight pipe clockwise, engaging positive locking channels, until
connection is firm. Do not force connection.
9. Assemble straight pipe with decal (K) to straight pipe (J) as in step
8.
NOTE
Blower use will eventually loosen pipe connections. Exclusive
positive locking system allows pipes to be tightened. If loosening
occurs, remove two straight pipes and install according to instruc-
tions 8 & 9.
F
E
J
K
C
H
F
I
E
H