![background image](http://html.mh-extra.com/html/echo/pb-211/pb-211_operators-manual_531526014.webp)
14
3.
Place the blower on a flat clear area. Firmly grasp throttle grip with
left hand and rapidly pull recoil starter handle/rope until engine
fires.
4.
Push choke all the way in. (Open position)
Pull recoil starter handle/rope until engine starts and runs. Allow
unit to warm up at idle for several minutes.
NOTE
If engine does not start with choke in “Run” position after 4 pulls,
repeat instructions.
5.
After engine warm up, gradually depress throttle trigger to
increase engine r/min to operating speed.
STARTING
WARM
ENGINE
1.
Stop Switch - Start/Run.
Turn switch to “RUN” position.
2.
Place the blower on a flat clear area. Firmly grasp throttle grip with
left hand and rapidly pull recoil starter handle/rope until engine
fires.
IMPORTANT
Recoil starter: Use short pulls - only 1/2 - 2/3 of rope for starting.
Do not allow the rope to snap back in. Always hold the unit
firmly.
NOTE
If engine does not start after 4 pulls, use Cold Start Procedure.
STOPPING
ENGINE
1.
Release throttle trigger and allow engine to idle for a minute.
2.
Move stop switch to “STOP” position.
WARNING
DANGER
If engine does not stop when stop switch is moved to STOP
position, close choke - COLD START position - to stall engine.
Have your ECHO dealer repair stop switch before using blower
again.
Recoil starter handle
Stop switch
Stop switch
Содержание PB-211
Страница 23: ...23 POWER BLOWER OPERATOR S MANUAL NOTES ...