6
9.
Press ON/OFF button (figure 2) for 3 seconds to ON position, the ON/OFF indicator
LED will light up Green and the volume indicator will light up blue (2 bars); after 2
seconds the blue volume indicator LED will go out.
10.
Increase the volume
by gently pressing on the pad with the plus symbol (figure 2). To
reduce the volume press the pad with the minus symbol (figure 2). The volume
indicator will light up blue and as the volume increases the LED indicator will change
from blue to green to red,
indicating the level of volume. Blue being the lowest; red
being the highest volume.
*NOTE
when
the volume indicator is at the red position the amplifier will use more power
and will reduce the life of the dry cell.
Always start listening at a low volume, too high volume can seriously damage your hearing.
IMPORTANT
–
If the volume does not increase,
switch the MiniTech
Pro®
OFF and check
that microphone and headset or neck loop is inserted fully in the correct sockets before
switching on again.
11.
To adjust
the
tone, turn
tone
wheel
anti-clockwise for treble
emphasis,
or
clockwise
for bass
emphasis
(figure 2).
12.
To use the MiniTech Pro®
with a loop system in a public place. Make sure the
ON/OFF button
(figure 2)
is in the OFF position.
Attach the headset
to the
headphone
socket (figure
2). Activate the
T
mode by turning the T Switch
ON;
the
T
mode
indicator will light
up
red. Adjust the volume until you find a suitable level. Adjust the
position of the MiniTech Pro® until you find the best reception
from
the loop system.
13.
Most products with a line output can be
directly
connected to the MiniTech Pro®
with an audio
lead
using the line input socket
(audio lead not included).
14.
Switch between
two inputs;
microphone and line input,
using the selector button.
15.
The selector button is only active when the microphone and line input sockets are in
use
at the same time.
When
the
microphone input is in use,
the microphone
indicator LED will light
up
green. To switch to line input, press
the
selector button
once, the microphone
indicator
LED will go out and the
line input
indicator
LED will
light
up
green.
16.
When one of the inputs are disconnected the green
selector button
indicator LED
will go out.
This
function
allows the user to switch between an audio source and a
microphone, ideal
for when the user wants to converse with someone whilst watching TV.
