5
Figure 3
Using this product inappropriately could adversely affect your hearing.
Please follow the step-by-step installation instructions carefully.
1.
Make sure the ON/OFF button (figure 2) is in the OFF position.
2.
Remove belt clip to access dry cell compartment – to release, turn belt clip
anticlockwise (figure 3).
3.
Gently press dry cell cover to remove and insert 2 x AA dry cells, ensuring they are
placed the correct way round, as illustrated on diagram inside dry cell compartment
(figure 3).
4.
Replace dry cell cover securely (Figure 3).
5.
Replace belt clip – insert belt clip and turn clockwise to secure.
6.
Fully insert the “stubby” microphone (5) or the microphone on 1.5m lead (3) into the
‘Microphone in’ socket (figure 2).
Use the ‘stubby’ microphone for one to one conversation and meetings or taking out &
about. Or you can use the microphone on 1.5m lead to pick up sound from a TV or other
sound source, by placing the microphone by the speaker. The microphone can be kept in
position by using the Velcro pad provided.
To increase the distance the user can be from the sound source, the 3 meter extension lead
(8)
can be connected between the MiniTech Pro®
unit and the microphone. Up to two
extension leads can be used to extend the distance between the MiniTech Pro®
unit and the
sound source (one extension lead is provided).
*NOTE Care must be taken in positioning the leads to avoid the danger of tripping etc.
7.
Fully insert headset or neck loop into Headphone socket (figure 2).
8.
If using neck loop, wear around your neck and switch hearing aid to “T” position.
