background image

HC-2420/3020

SAFETY

X7702242900

7

© 1/2015 ECHO Inc.

• DO NOT OPERATE UNIT BAREFOOTED.

Keep long hair away from engine and air intake. Retain hair with cap or net.

Heavy protective clothing can increase operator fatigue, which may lead to heat stroke. Schedule heavy 
work for early morning or late afternoon hours when temperatures are cooler.

The components of this machine generate an electromagnetic field during operation, which may 
interfere with some pacemakers.

 

To reduce the risk of serious or fatal injury, persons with 

pacemakers should consult with their physician and the pacemaker manufacturer before operating 
this machine.

 

In the absence of such information, ECHO does not recommend the use of this 

machine by anyone who has a pacemaker.

Extended Operation / Extreme Conditions

Prolonged exposure to cold and/or vibration may result in injury. Read and follow all safety and 
operation instructions to minimize risk of injury. Failure to follow instructions may result in painful 
wrist/hand/arm injuries.

It is believed that a condition called Raynaud’s Phenomenon, which affects the fingers of certain individuals, 
may be brought about by exposure to vibration and cold. Exposure to vibration and cold may cause tingling 
and burning sensations, followed by loss of color and numbness in the fingers. The following precautions are 
strongly recommended, because the minimum exposure, which might trigger the ailment, is unknown.

 

• Keep your body warm, especially the head, neck, feet, ankles, 

hands, and wrists.

• Maintain good blood circulation by performing vigorous arm 

exercises during frequent work breaks, and also by not 
smoking.

• Limit the hours of operation. Try to fill each day with jobs 

where operating the unit or other hand-held power equipment 
is not required.

• If you experience discomfort, redness, and swelling of the 

fingers followed by whitening and loss of feeling, consult your physician before further exposing yourself to 
cold and vibration.

Содержание HC-2420









































Отзывы: