Echo HC-2420, Руководство оператора

Страница: 24 / 40

24
X7702242900
© 1/2015 ECHO Inc.
MAINTENANCE HC-2420/3020
Spark Plug
Level 2.
Use only NGK BPM-8Y spark plug (BPMR-8Y in Canada)
otherwise severe engine damage may occur.
1. Remove spark plug and check for fouling, worn and rounded
center electrode.
2. Clean the plug or replace with a new one. DO NOT sand blast to clean. Remaining sand will damage
engine.
3. Adjust spark plug gap by bending outer electrode.
4. Tighten spark plug to 150-170 kgf • cm (130-150 in • lbf).
Cooling System
Level 2.
To maintain proper engine operating temperatures, cooling air must pass freely through the cylinder fin area.
This flow of air carries combustion heat away from the engine.
Overheating and engine seizure can occur when:
• Air intakes are blocked, preventing cooling air from reaching the cylinder.
• Dust and grass build up on the outside of the cylinder. This build up insulates the engine and prevents the
heat from leaving.
Removal of cooling passage blockages or cleaning of cooling fins is considered “Normal Maintenance.” Any
failure attributed to lack of maintenance is not warranted.
1. Remove muffler cover.
2. Remove starter cover and clean dirt and dust from fins.
DO NOT use a metal scraper to remove dirt from the cylinder fins.
3. Assemble components in reverse order.
Exhaust System
Spark Arrestor Screen
Level 2.
Parts Required:
REPOWER
TM
Tune-Up Kit
Parts Required: None if you are careful.
0.65 mm
(0.026 in.)