Echo HC-165 Скачать руководство пользователя страница 2

Страница: 2 / 32

able

onTenTs

Introduction ..................................................................... 2

- The Operator's Manual ............................................. 2

- The Safety manual ................................................... 2

Safety .............................................................................. 3

- Manual Safety Symbols and Important Information 3

- International Symbols .............................................. 3

- Personal Condition and Safety Equipment .............. 4

- Equipment Check ..................................................... 6

Emission Control ............................................................ 6

Description ...................................................................... 7

Contents .......................................................................... 9

Assembly......................................................................... 9

- Blade Stiffener Removal ........................................ 10

- Install Blade Stiffener ............................................ 10

Operation ....................................................................... 11

- Fuel ........................................................................ 11

- Starting Cold Engine .............................................. 13

- Starting Warm Engine ............................................ 14

- Stopping Engine ..................................................... 14

- Rotating Operation ................................................. 15

- Hedge Trimming .................................................... 16

Maintenance .................................................................. 16

- Skill Levels ............................................................ 16

- Maintenance Intervals ............................................ 17

- Air Filter ................................................................ 18

- Fuel Filter ............................................................... 18

- Spark Plug .............................................................. 19

- Cooling System ..................................................... 19

- Exhaust System ...................................................... 20

- Carburetor Adjustment ........................................... 21

High Altitude Operation ...................................... 21

- Lubrication ............................................................. 22

- Sharpening Blades ................................................. 23

- Blade Adjustment ................................................... 24

Troubleshooting ............................................................ 25

Storage .......................................................................... 26

Specifications

................................................................ 27

Warranty Statements ..................................................... 28

Servicing Information ................................................... 32

- Parts/Serial Number ............................................... 32

- Service ................................................................... 32

- ECHO Consumer Product Support ........................ 32

- Warranty Card ........................................................ 32

- Additional or Replacement Manuals ..................... 32

Specifications, descriptions and illustrative material in this

literature are as accurate as known at the time of publica-

tion, but are subject to change without notice. Illustrations

may include optional equipment and accessories, and may

not include all standard equipment.

nTroduCTIon

Welcome to the ECHO family. This ECHO product was designed and manufactured to provide long life and on-the-

job dependability. Read and understand this manual. You will find it easy to use and full of helpful operating tips and

SAFETY messages.

The

operaTor

’

manual

Read and understand this manual before operation. Keep it in a safe

place for future reference. It contains specifications and information

for operation, starting, stopping, maintenance, storage, and assembly

specific to this product.

The

safeTy

manual

Read and understand this manual before operation. Keep it in a safe

place for future reference. It explains possible hazards involved with

the use of this product and what measures you should take to make

their use safer.

Hedge Clipper

Operator's Manual

M O D E L

HC-165
HC-185

WARNING

Read rules for safe operation and all instructions carefully. ECHO provides this
Operator's Manual and a Safety Manual. Both must be read and understood for
proper and safe operation.

X7502255300

X750010190
xx/07

HC165_185es_032007.pmd

Содержание HC-165

































Результаты поиска

Содержание HC-165

Отзывы:

Похожие инструкции для HC-165

Бренды по названию

Популярные бренды

Echo HC-165, Руководство оператора

Результаты поиска

Содержание HC-165

Отзывы:

Похожие инструкции для HC-165

Бренды по названию

Популярные бренды