Echo HC-155-20 Скачать руководство пользователя страница 2

Страница: 2 / 32

ntroductIon

Welcome to the ECHO family. This ECHO product was designed and manufactured to provide long life and on-the-job-

dependability. Read and understand this manual and the SAFETY MANUAL. You will find both easy to use and full of

helpful operations tips and SAFETY messages.

the

operator

’

manual

Keep it in a safe place for future reference. Contains specifications and

information for safety, operation, maintenance, storage, and assembly

specific to this product.

the

safety

manual

Keep it in a safe place for future reference. Explains possible hazards

and the measures you should take to insure safe operation.

able

ontents

Introduction ..................................................................... 2

- The Operator's Manual ............................................. 2

- The Safety manual ................................................... 2

Safety .............................................................................. 3

- Manual Safety Symbols and Important Information 3

- International Symbols .............................................. 3

- Personal Condition and Safety Equipment .............. 3

- Equipment Check ..................................................... 6

Emission Control ............................................................ 8

Description ...................................................................... 7

Contents .......................................................................... 9

Assembly......................................................................... 9

- Remove Blade Guard ............................................. 10

- Install Blade Guard ................................................ 10

Operation ....................................................................... 11

- Fuel ........................................................................ 11

- Starting Cold Engine .............................................. 13

- Starting Warm Engine ............................................ 14

- Stopping Engine ..................................................... 14

- Hedge Trimming .................................................... 15

Maintenance .................................................................. 15

- Skill Levels ............................................................ 16

- Maintenance Intervals ............................................ 16

- Air Filter ................................................................ 17

- Fuel Filter ............................................................... 17

- Spark Plug .............................................................. 18

- Cooling System ..................................................... 18

- Exhaust System ...................................................... 19

- Carburetor Adjustment ........................................... 20

High Altitude Operation ...................................... 20

- Lubrication ............................................................. 21

- Sharpening Blades ................................................. 23

- Blade Adjustment ................................................... 24

Troubleshooting ............................................................ 25

Storage .......................................................................... 26

Specifications

................................................................ 27

Warranty Statements ..................................................... 27

Servicing Information ................................................... 32

- Parts/Serial Number ............................................... 32

- Service ................................................................... 32

- ECHO Consumer Product Support ........................ 32

- Warranty Card ........................................................ 32

- Additional or Replacement Manuals ..................... 32

Specifications, descriptions and illustrative material in this

literature are as accurate as known at the time of publica-

tion, but are subject to change without notice. Illustrations

may include optional equipment and accessories, and may

not include all standard equipment.

Содержание HC-155-20

































Результаты поиска

Содержание HC-155-20

Отзывы:

Похожие инструкции для HC-155-20

Бренды по названию

Популярные бренды

Echo HC-155-20, Руководство оператора

Результаты поиска

Содержание HC-155-20

Отзывы:

Похожие инструкции для HC-155-20

Бренды по названию

Популярные бренды