Echo H2 Pitcher, Руководство пользователя

Страница: 9 / 14

9
Hydrogen Water Button
Before first use, open the top cover and unscrew and remove the electrode
moisture retention caps (2 pieces) inside the water pitcher. The m oisture
retention caps prevent electrodes from drying out during distribution.
○ If the pitcher will not be used for m ore than a week, fill the electrodes with
water and lock the m oisture retention cap by screwing them in place.
It is
important to remove caps before next use.
For first use or if you have not used the pitcher for m ore than one week, follow
cleaning procedures. (see page 10)
Open the top cover and fill with filtered water (R.O. or distilled).
10 minute Cycle:
Press and hold the Hydrogen Water Button for 2 seconds and the BLUE LED will
light up at the bottom . Display will show 10 m inutes. After 10 m inutes, the Echo H2
Pitcher will turn off autom atically
20 Minute Cycle:
For higher concentrations of hydrogen, press the operating button twice and the
GREEN LED will light on the bottom . After 20 m inutes, the Echo H2 Pitcher will turn
off autom atically.
How to Use
Electrode
Moisture
Retention Caps
(Remove by
unscrewing
before use)
If you want to
stop generating
hydrogen, press
and hold the
Hydrogen Water
Button for 2
seconds,
hydrogen
generation will
stop and pitcher
will turn off.