How to Clean
Cleaning Button
Add baking soda to
water
②
Pour
dissolved
baking
soda and
water into
Pitcher
10
Cleaning Procedure
●
When using for the first tim e, put approx. ¼ cup (50cc) of water
(68°F~104°F/20
℃
~ 40
℃
) in a cup, dissolve 2 tsp/10g of baking soda into the
water.
●
Once fully dissolved, pour water/baking soda solution into water container and
leave for about 1 hour. (leaving it for 1-2 hours will have a better cleaning effect.)
●
After 1 hour rinse with clean water (distilled water or RO water) 2 ~ 3 tim es
before use.
●
Fill the clean water in the pitcher/kettle (distilled water or RO water around
(68°F~104°F/20
℃
~ 40
℃
) about 2/3 full and run the cleaning m ode 2 ~ 3 tim es.
For best results change the water each tim e (RED LED turns on when cleaning
m ode is activated)
●
Clean the inside with a soft cloth, cotton swab, or sponge. If dust or dirt is not
rem oved, add som e water and gently swirl several tim es.
Extra Cleaning Tips
○
For better cleaning, use with the power cable connected.
○
Water that is rich in m inerals m ay have cloudy bubbles and less hydrogen
bubbles. If there are less hydrogen bubbles, use the above cleaning m ode
before use.
○
Water Container Cleaning
- Clean the pitcher/kettle with a soft cloth or
sponge, etc., and thoroughly rinse it before use.
○
Product Appearance - Wipe off dust and dirt from the pitcher/kettle with
a wet cloth. (Keep water away from power terminal and battery)
Long-term use of the pitcher/kettle may cause the electrode to smell. The smell of
the electrode has nothing to do with hydrogen production and does not affect the
taste of water. Periodically, clean the electrode and pitcher/kettle to prevent odors.
Smell may require several cycles of cleaning to remove.
Содержание H2 Pitcher
Страница 1: ...Echo H2 Pitcher Owner s Manual ...
