Echo GT-200 Скачать руководство пользователя страница 23

Страница: 23 / 24

RASS

RIMMER

PERATOR

ANUAL

MODEL ------------------------------------------ GT-200

Length -------------------------------------------- 1400 mm (55.1 in.)

Width --------------------------------------------- 310 mm (12.2 in.)

Height -------------------------------------------- 385 mm (15.2 in.)

Weight (dry) w/Cutter Head ------------------- 4.1 kg (9.04 lb.)

Engine Type ------------------------------------- Air cooled, two-stroke, single cylinder gasoline engine

Bore ----------------------------------------------- 32.2 mm (1.27 in.)

Stroke --------------------------------------------- 26.0 mm (1.02 in.)

Displacement ------------------------------------ 21.2 cc (1.29 cu. in.)

Exhaust System --------------------------------- Spark Arrestor Muffler

Carburetor --------------------------------------- Zama diaphragm model w/primer

Ignition System --------------------------------- Flywheel magneto, capacitor discharge

Spark Plug --------------------------------------- NGK BPMR-8Y Gap 0.65 mm (0.026 in.)

Fuel ----------------------------------------------- Mixed (Gasoline and Two-stroke Oil)

Fuel/Oil Ratio ------------------------------------ 50:1 two-stroke air cooled engine oil

Gasoline ------------------------------------------ 89 Octane unleaded. DO NOT use fuel containing methyl alcohol, more than

10% ethyl alcohol or 15% MTBE.

Oil ------------------------------------------------- Power Blend

Premium Universal 2-Stroke Oil

Fuel Tank Capacity ----------------------------- 0.45 lit. (15.2 US fl. oz.)

Starter System ----------------------------------- i30 Automatic Rewind Starter

Clutch -------------------------------------------- Centrifugal Type

Drive Shaft --------------------------------------- 1/4 in. Flex Shaft

Rotating Direction ------------------------------ Clockwise viewed from top

Cutter Head -------------------------------------- Nylon line head with .080 in. line capacity 4.6 m (19 ft.)

Handle -------------------------------------------- Left - D-Loop, Right - Grip

Shoulder Harness ------------------------------- Optional P/N 99944200201

Idle Speed (RPM) ------------------------------- 2,750 - 3,250 RPM

Clutch Engagement Speed (RPM) ------------ 3,500 - 4,100

Wide Open Throttle Speed (W.O.T.)

with Nylon Line Head (RPM) ----------------- 7,500 - 8,500 RPM

PECIFICATIONS

IMPORTANT
This spark ignition system complies with Canadian ICES-002

Содержание GT-200

























Результаты поиска

Содержание GT-200

Отзывы:

Похожие инструкции для GT-200

Бренды по названию

Популярные бренды

Echo GT-200, Руководство оператора

Результаты поиска

Содержание GT-200

Отзывы:

Похожие инструкции для GT-200

Бренды по названию

Популярные бренды