![background image](http://html1.mh-extra.com/html/echo/egi-1200/egi-1200_operators-manual_3906345010.webp)
10
4. CONTROL FUNCTION
4.1 3-in-1 switch knob
1.
Engine switch\fuel valve “OFF”; Ignition circuit is switched off. Fuel is
switched off. The engine will not run if switch is in this position.
2. Engine switch\fuel valve\choke “ON”; Ignition circuit is switched on.
Fuel is switched on. Choke is switched OFF. The engine can be running.
3. Engine switch\fuel valve\choke “CHOKE”; Ignition circuit is switched
on. Fuel is switched on. Choke is switched ON. The engine can be
started.
TIP:
The choke “ ” is not required to start a warm engine.
4.2 Oil warning light (red)
When the oil level falls below the lower level, the oil warning light (1) comes
on and then the engine stops automatically. Unless you refill with oil, the
engine will not start again.
TIP:
If the engine stalls or does not start, turn the engine switch to “ON” and
then pull the recoil starter. If the oil warning light flickers for a few seconds, the
engine oil is insufficient. Add oil and restart.
CONTROL FUNCTION
Содержание EGi-1200
Страница 34: ...34 12 WIRING DIAGRAM WIRING DIAGRAM...
Страница 41: ...41 NOTES...
Страница 126: ...42 NOTES...
Страница 127: ...43 NOTES...