Hitachi CP-X200 CP-X300 Operating Manual Download | Manualshive

Page: 1 / 61

background image

1

Projector

CP-X200/CP-X300/CP-X400

User's Manual (detailed)

Operating Guide

Thank you for purchasing this projector.

WARNING

►

Before using this product, please read all manuals for this

product. Be sure to read “Safety Guide” first. After reading them, store them in
a safe place for future reference.

About this manual

Various symbols are used in this manual. The meanings of these symbols are
described below.

WARNING

This symbol indicates information that, if ignored, could possibly

result in personal injury or even death due to incorrect handling.

CAUTION

This symbol indicates information that, if ignored, could possibly

result in personal injury or physical damage due to incorrect
handling.



Please refer to the pages written following this symbol.

NOTE

• The information in this manual is subject to change without notice.

• The manufacturer assumes no responsibility for any errors that may appear in this manual.
• The reproduction, transfer or copy of all or any part of this document is not permitted

without express written consent.

Trademark acknowledgment

• Mac is registered trademarks of Apple Computer, Inc.
• VESA and SVGA are trademarks of the Video Electronics Standard Association.
• Windows is a registered trademark of Microsoft Corporation.

All other trademarks are the properties of their respective owners.

1
2
3
...
»

Summary of Contents for CP-X200 CP-X300






























































Reviews:

No comments

Related manuals for CP-X200 CP-X300

Brand: MADRIX Pages: 36

Brand: EAS Electric Pages: 4

Brand: EAS Electric Pages: 31

Brand: YASKAWA Pages: 128

Brand: ZIEHL-ABEGG Pages: 26

Brand: V-TAC Pages: 4

Brand: Icy Box Pages: 2

Track Rack F Series

Brand: ZOMEWORKS Pages: 2

Brand: Giandel Pages: 8

Brand: mundoclima Pages: 60

FR-S520-0.1K to 3.7K(-R)(-C)

Brand: Mitsubishi Pages: 55

SUNNY TRIPOWER 20000TL High Efficiency

Brand: SMA Pages: 46

Brand: Lindy Pages: 2

Brand: Tektronix Pages: 28

Brand: Hal Communications Pages: 64

Brand: Wacker Neuson Pages: 36

CONVERTER DC-AC

Brand: CARPOINT Pages: 7

RCA Analog Video Input Card w/Analog Audio DMC-VID-RCA-A

Brand: Crestron Pages: 1

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands