![background image](http://html.mh-extra.com/html/echo/cs-670/cs-670_operators-manual_531930008.webp)
8
CS-670
PREPARATION FOR USE
CAUTION
• All adjustment, should be made cold.
• Always wear gloves when working on chain.
MOUNTING GUIDE BAR AND
CHAIN
• Install the spiked bumper on the front of
machine. (Use two bolts 5
×
12 mm)
KICK GUARD
®
TO BAR
INSTRUCTIONS
Tools Needed: Two 11 mm (7/16 in) Wrenches.
For saws with Kick Guard
®
P/N 28932 and
Symmetrical Low-Kick type (Double Guard)
guide bars.
1. Install bolt (A) in
front hole (B) of Kick Guard
®
and through front hole (C) in guide bar.
2. IMPORTANT: Dimple (D) in Kick Guard
®
must
engage recess (E) in guide bar.
3. Tighten nut (F) and bolt (A) using 11 mm (7/16 in)
wrenches until snug. Make certain Kick Guard
®
is flush against guide bar.
4. Tighten nut (F) 1/8 additional turn.
5. Check to make certain Kick Guard
®
is tight on
guide bar.
Bolt (A)
Dimple (D)
Recess (E)
Front hole (C)
Front hole (B)
Nut (F)
Guide bar
Kick Guard
®
Two bolts 5
×
12 mm
Spiked bumper